Semin Perfect Light Blue Top

Resin, water, calcium carbonate, lightweight fillers, preservation agent and various adjuvants.

The paste is white.

All types of plasterboard with or without insulation (glass wool, rock wool, polystyrene) with mitred edges and carded surfaces.

Plasterboard primer.

Smoothing filler.

• CE marking
• DTU 25.41 and DTU 25.42
• NF EN 13963
• DoP

20 kg buckets on covered pallet.

12 months in original unopened packaging away from frost and high temperatures.

Before actual jointing, fill any accidental gaps between boards and any other areas (spalls, deterioration of the surface etc.).

Apply manually by ?buttering? the mitred-edge using a 10 or 15 cm plaster spatula and then adding the tape (milled face against the jointing coating).

Then add a finishing coat, allow to dry and finish to hide the tape.

Also hide the screw heads.

For projecting vertical edges, use reinforced tape (reinforcing face on board side).

Apply a tape band on the inside ceiling edges ensuring that the concrete is free of any trace of formwork oil.

The substrate must be dry and free of any powdery or insufficiently adhesive product.

Product suitable for mechanized application: bazooka and airless.

Approximately 350 g/m²?of board (500 g/m²?for a traditional compound).

A repeat coat can be made 24 to 48 hours after application of the first coat, depending on the ambient conditions.